BPSTK - 605 OAK
- MSDS: BPSTK
- Manufacturer: NORPLEX OAK
- Product Name: 605 OAK
- National Stock Number: 9535-00F025789
Product Identification
Product ID:605 OAK
MSDS Date:06/01/1990
FSC:9535
NIIN:00F025789
MSDS Number: BPSTK
Responsible Party
LA CROSSE, WI 54602-1448
US
Emergency Phone: 608-784-6070
Info Phone: 608-791-2490
Cage: 0N092
Contractor
Telephone: 608-784-6070
Cage: 0N092
Ingredients
GLASS, OXIDE *92/3*
CAS: 65997-17-3
Fraction By Weight: >1%
COPPER (DUST & MIST), BRONZE POWDER
CAS: 7440-50-8
RTECS: GL5325000
Fraction By Weight: <10%
OSHA PEL 0.1 MG(CU)/M3 (FUME)
ACGIH TLV: 0.2 MG/M3 (FUME)
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
Hazards
Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES/SKIN: IRRITATION.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:INHALATION: FLU-LIKE SYSPTOMS AFTER 2 HRS OF
EXPOSURE.
First Aid
First Aid:EYES/SKIN: WASH W/WATER FOR 15 MINS. INHALATION: REMOVE TO
FRESH AIR, IF NOT BREATHING GIVE ARTIFICIAL RESPIRATION. INGESTION:
OBTAIN MEDICAL ATTENTION IN ALL CASES.
Fire Fighting
Extinguishing Media:WATER, CO2 & DRY CHEMICAL DEPENDING ON EXTERNAL
FIRE SOURCE. PTFE BY ITSELF IS NONFLAMMABLE IN ORDINARY ATMOSPHERE.
Fire Fighting Procedures:FIREMEN SHOULD WEAR ACID RESISTANT CLOTHING &
FACE PROTECTION W/FILTER CANISTER OR POSITIVE PRESSURE
SELF-CONTAINED BREATHING APPARATUS.
Unusual Fire/Explosion Hazard:PTFE DOES NOT BURN W/OUT AN EXTERNAL
SOURCE OF FUEL. DRY PTFE WILL BURN IN AN ATMOSPHERE OF 100% OXYGEN
WHEN AN IGNITION SOURCE IS PRESENT.
Exposure Controls
Respiratory Protection:USE A DUST RESPIRATOR WHEN PROTECTION IS
REQUIRED FOR CERTAIN OPERATIONS.
Ventilation:ADEQUATE TO KEEP EXPOSURE BELOW TLV.
Protective Gloves:RECOMMENDED
Eye Protection:RECOMMENDED
Other Protective Equipment:APRONS, CLEAN BODY-COVERING CLOTHING.
Work Hygienic Practices:REMOVE & WASH CONTAMINATED CLOTHES BEFORE
REUSE.
Supplemental Safety and Health
Chemical Properties
Spec Gravity: 2.20
Solubility in Water:INSOLUBLE
Appearance and Odor:SHEET MATERIAL, TRANSLUCENT GRAY, ODORLESS.
Stability
Stability Indicator/Materials to Avoid:YES
MOLTEN ALKALI METALS, INTERHALOGEN COMPOUNDS
Stability Condition to Avoid:EXTERNAL SOURCES OF FLAME, TEMPERATURES
>750F
Hazardous Decomposition Products:CO, HYDROGEN FLUORIDE,
TETRAFLUOROETHYLENE & OTHER FLUORINATED ORGANIC CMPDS MAY BE
RELEASED DUE TO BURNING.
Disposal
Waste Disposal Methods:LANDFILL OF SCRAP OR COMPLETE COMBUSTION &
REMOVAL OF GASEOUS PRODUCTS BY ALKALINE SCRUBBING. DISPOSE OF IN
ACCORDANCE W/FEDERAL, STATE & LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.